周滔

基本信息

姓名：周滔 (1994.08, 中共产党员)                

职称：讲师 (贵州大学)              

邮箱：tzhou@gzu.edu.cn

教育与工作经历

2021.10-至今：贵州大学，讲师/校聘副教授，硕士生导师

2016.09-2021.06：贵州大学，机械制造及其自动化（硕博连读），博士学位

2012.09-2016.06：鲁东大学，车辆工程，学士学位

主要研究领域

1. 数据驱动的航空难加工材料表面完整性控制

2. 高性能数控刀具智能优化设计理论与方法

3. 面向绿色制造的多能场辅助精密加工技术

4. 面向增减材复合理论的智能制造技术

科研项目

1. 增减材再制造梯度硬质合金刀具多尺度应力调控与裂纹扩展机制研究，国家自然科学基金，主持，2026~2028

2. 热-冷源协同辅助铣削粉末高温合金的热力场多源耦合作用机理及分区调控机制，国家自然科学基金，主持，2026~2029

3. 高速铣削热作模具钢表面完整性创成机理及服役性能调控，贵州省青年科技人才成长项目，主持，2024~2026

4. 航空发动机火焰筒组件精密制造技术集成与示范，贵州省产业成果转化项目，高校负责人，2025~2026

5. 热-冷源协同辅助铣削高温合金的增效作用机制及其调控方法研究，贵州省基础研究项目，主持，2024~2027

6.切削表面残余应力混合建模方法研究，贵州大学人才引进科研项目，主持

7.基于仿真的FGH99/GH4169D刀具开发选用技术服务，中国航发，技术负责人，2024~2025

8.热-冷源协同增效铣削高强度合金热力场分区调控方法研究，贵州大学基础研究项目，主持，2024~2026

教授课程

本科：互换性与技术测量、机械制造装备设计、装备自动化工程设计与实践

研究生：运筹学

论文信息

1. Tao Zhou, Hao Cui, Wang Yu, Yang Wenjie, Lin He. Multi-physics analytical modeling of the primary shear zone and milling force prediction.Journal of Materials Processing Technology. 2023.117949(SCI, IF=6.1).

2. Du, F., Chen, F., Zhou, T. *, Yao, H., Zhao, X., Zhu, D., & He, L. Design and performance analysis of wear-resistant micro-groove cutting tool: Numerical simulation and experimental study. Materials & Design, 2025, 114344. (SCI, IF=7.8).

3. Zhou, T., Cui, H., Du, F.*, Zhang, C., Tian, P., & He, L. Tool segmentation design method of hybrid optimization framework with geometric modeling-finite element-genetic algorithm. CIRP Journal of Manufacturing Science and Technology, 2025, 56: 88-105. (SCI, IF=4.6).

4. Tao Zhou, Tian Zhou, Cheng Zhang*, Cong Sun, Hao Cui, Pengfei Tian, Feilong Du, Lin He. Hybrid modeling with finite element—analysis—neural network for predicting residual stress in orthogonal cutting of H13. Journal of Materials Research and Technology. 2024(1). (SCI, IF=6.26).

5. Tao Zhou, Lin He*, Pengfei Tian. Inverse identification of material constitutive parameters based on co-simulation. Journal of Materials Research and Technology. 2022(10): 221-237. (SCI, IF=6.26).

6. Tao Zhou, Lin He*, Zhongfei Zou, Feilong Du, Jinxing Wu, Pengfei Tian. Three dimensional turning force prediction based on hybrid finite element and predictive machining theory considering edge radius and nose radius. Journal of Manufacturing Processes, 2020(58): 1304-1317 (SCI, IF=5.01).

7. Feilong Du, Tao Zhou^*, Pengfei Tian. Cutting performance and cutting fluid infiltration characteristics into tool-chip interface during MQL milling[J]. Measurement, 2024, 225: 113989. (SCI, IF=5.6).

8. Zichuan Zou ,Lin He^*, Tao Zhou^*, et al. Research on inverse identification of johnson-cook constitutive parameters for turning 304 stainless steel based on coupling simulation[J]. Journal of Materials Research and Technology,2023,23. (SCI, IF=6.26)

9. Tao Zhou, Lin He*, Jinxing Wu, Feilong Du, Zhongfei Zou. Prediction of Surface Roughness of 304 Stainless Steel and Multi-Objective Optimization of Cutting Parameters Based on GA-GBRT[J]. Applied Sciences,2019, 9(18): 3684.(SCI, IF=2.474).

10. Tian Pengfei, He Lin, Zhou Tao, Feilong Du, Zhongfei Zou, Zhou Xiaorong, Jiang Hongwan. Reverse identification of constitutive parameters of Inconel 718 alloy based on analytical model and thermo-mechanical loads analysis of machined surface[J]. Journal of Materials Research and Technology, 2022(16):1353-1370. (SCI, IF=6.26)

11. Tian Pengfei,He Lin, Zhou Tao, Du Feilong, Zou Zichuan, Zhou Xiaorong, Jiang Hongwan. Effect of workpiece microstructure on tool wear behavior and surface quality during machining Inconel 718 alloy[J]. Tribology International,2022,175. (SCI, IF=5.62).

12. Zou Zichuan, He Lin, Zhou Tao, Wang Meng, Tian Pengfei, Zhou Xiaorong. Research on microhardness prediction of 304 stainless steel turning based on dislocation density[J]. Journal of Manufacturing Processes,2022,83. (SCI二区, IF=5.01).

13. Zhou Xiaorong, He Lin, Zhou Tao, Jiang Hongwan, Xu Jiangyi, Tian Pengfei, Zou Zichuan, Du Feilong. Multiscale research of microstructure evolution during turning Ti-6Al-4V alloy based on FE and CA[J]. Journal of Alloys and Compounds,2022,922. (SCI, IF=6.37).

14. Du Feilong, He Lin, Zhou Tao,Tian Pengfei, Zou Zichuan, Zhou Xiaorong. Analysis of droplet characteristics and cooling lubrication effects in MQL milling of 316L stainless steel[J]. Journal of Materials Research and Technology,2022,19. (SCI, IF=6.26).

15. Wen Jin , He Lin , Zhou Tao ,et al.Modeling of the polycrystalline cutting of austenitic stainless steel based on dislocation density theory and study of burr formation mechanism[J].Journal of Mechanical Science and Technology, 2023, 37(6):2855-2870. (SCI, IF=1.6)

16. Tian Peng , He Lin , Zhou Tao ,et al.Experimental characterization of the performance of MQL-assisted turning of solution heat-treated and aged Inconel 718 alloy[J].The International Journal of Advanced Manufacturing Technology, 2023, 125(7-8):3839-3851. (SCI, IF=3.4)

17. Xiaorong Zou ,Lin He ,Tao Zhou , et al. A comprehensive review of tool surface texturing in the cutting process[J]. The International Journal of Advanced Manufacturing Technology,2022,123(7-8). (SCI, IF=3.5)

18. Wen Jiaxin, He Lin, Tao Zhou, et al. Modeling of the polycrystalline cutting of austenitic stainless steel based on dislocation density theory and study of burr formation mechanism[J]. Journal of Mechanical Science and Technology, 2023, 37(6): 2855-2870. (SCI, IF=3.4)

19. Zichuan Zou, Lin He, Ting Zhang, Tao Zhou, Pengfei Tian. Research on serrated chip morphology for turning Ti6Al4V titanium alloy by considering damage evolution. Journal of Manufacturing Processes.2024(118): 283-301 (SCI, IF=6.2).

20. Feilong Du, Lin He, Haisong Huang, Tao Zhou, Jinxing Wu. Analysis and Multi-Objective Optimization for Reducing Energy Consumption and Improving Surface Quality during Dry Machining of 304 Stainless Steel[J]. Materials,2020,13(21). (SCI, IF=3.057).

21. Jinxing Wu, Gang Zhan, Lin He, Zhongfei Zou, Tao Zhou, Feilong Du. Tribological Performance of Micro-Groove Tools of Improving Tool Wear Resistance in Turning AISI 304 Process[J]. Materials,2020,13(5). (SCI, IF=3.057).

22. 周滔, 何林, 田鹏飞, 杜飞龙, 吴锦行. 直角切削6061-T6铝合金剪切区力学行为及微观结构演化预测[J].航空学报,2021,42(3);423975. (EI，卓越期刊).

23. 周滔, 何林, 田鹏飞, 杜飞龙, 吴锦行. 切削过程中剪切区微观组织演化的预测模型[J].华南理工大学学报(自然科学版),2021,49(01):82-92. (EI).

发明专利信息

1. 周滔, 何林, 吴锦行, 邹中妃. 一种基于GA-GBRT的表面粗糙度预测方法及工艺参数优化方法, 2021.12, 中国, CN201910084466.7

2. 周滔, 赵津, 袁征, 席阿行.一种基于阻尼器和橡胶空气弹簧的惩罚性减速带, 2019.10, 中国, CN201710913239.1

3. 周滔, 何林, 吴锦行. 一种基于热力耦合模型的工件表面残余应力调控方法,2022.3, 中国, CN201910066390.5